Search found 229 matches

by Andrew Baird
Fri May 22, 2009 9:56 am
Forum: Exhausts
Topic: Terry Shepherd pipes..
Replies: 60
Views: 30739

Re: Terry Shepherd pipes..

Ouch!! I didn't pay anything like that...

I blame the bankers!!

Andrew
by Andrew Baird
Thu May 21, 2009 11:22 pm
Forum: Wanted
Topic: NS400 forks wanted
Replies: 1
Views: 1480

Re: NS400 forks wanted

I may well have a set. I'll dig them out of the shed and check the condition for you. I was keeping them as spares, but I'm going with NC30 forks on the front soon. So can keep one set of standard forks as spares.

Cheers

Andrew
by Andrew Baird
Thu May 21, 2009 11:18 pm
Forum: Exhausts
Topic: exhaust cans
Replies: 3
Views: 3795

Re: exhaust cans

The real issue is the shape of the pipes themselves, rather than the cans. I've heard people say that gutting the pipes themselves can yield performance gains, but it's quite a job. I have Jollymotos on mine and they make a big difference. I'd suggest that there's little point in drilling the airbox...
by Andrew Baird
Thu May 21, 2009 11:13 pm
Forum: Exhausts
Topic: Terry Shepherd pipes..
Replies: 60
Views: 30739

Re: Terry Shepherd pipes..

Jollymotos may actually work out cheaper in the long run, but I haven't looked to see what they're going for recently and the exchange rate doesn't help...

They certainly work.

Cheers

Andrew
by Andrew Baird
Tue Feb 03, 2009 11:33 am
Forum: Wanted
Topic: crank seals wanted...
Replies: 60
Views: 33853

Re: crank seals wanted...

I thought SEP in Kegworth were able to successfully rebuild cranks without OEM seals, but I may have got that wrong. Memory is not what it used to be...

Cheers

Andrew
by Andrew Baird
Thu Dec 18, 2008 7:41 pm
Forum: Exhausts
Topic: Silencer Brand and type
Replies: 5
Views: 5800

Re: Silencer Brand and type

Mat

Those will be the same ones - they're a fair diameter, but very light, so need no support.

Cheers

Andrew
by Andrew Baird
Mon Dec 15, 2008 3:04 pm
Forum: Exhausts
Topic: Silencer Brand and type
Replies: 5
Views: 5800

Re: Silencer Brand and type

DEP did some, but I never thought they looked too good. They were relatively cheap though. I've got a set that I think were originally 'Beckett' but have since been badged as other manufacturers, but as far as I know they're not still made. Your best bet may be Nigel Kimber http://www.nkracing.co.uk...
by Andrew Baird
Wed Mar 21, 2007 6:50 pm
Forum: Wanted
Topic: crank seals wanted...
Replies: 60
Views: 33853

I'm in. Will need them sooner or later...
by Andrew Baird
Fri Nov 24, 2006 8:18 pm
Forum: For Sale
Topic: XLR 250 - f*** stroke trailie
Replies: 3
Views: 2026

Sold
by Andrew Baird
Fri Nov 24, 2006 12:40 pm
Forum: Engine, Clutch & Gearbox
Topic: CR500R engine in one of my NS400Rs?
Replies: 21
Views: 11120

Mike

I've PM'd you my e-mail address.

Cheers

Andrew
by Andrew Baird
Sun Nov 19, 2006 11:37 pm
Forum: For Sale
Topic: XLR 250 - f*** stroke trailie
Replies: 3
Views: 2026

by Andrew Baird
Thu Nov 09, 2006 1:52 pm
Forum: Other
Topic: Newby - some questions
Replies: 42
Views: 14603

Its quite tricky when you're trying to measure to an 'edge' rather than a 'surface'...

Anyway, with my failing eyesite and cheap calipers, I made it 22.1mm. The dome adds another 8mm.

Just don't make expensive decisions based on those figures!

Cheers

Andrew
by Andrew Baird
Wed Nov 08, 2006 8:42 pm
Forum: Other
Topic: Newby - some questions
Replies: 42
Views: 14603

For a bore of 57mm, you could go for a +1mm DT125R (the late model). Got one sitting in my kitchen if you want me to take any measurements.

Cheers

Andrew
by Andrew Baird
Tue Nov 07, 2006 8:43 pm
Forum: Engine, Clutch & Gearbox
Topic: CR500R engine in one of my NS400Rs?
Replies: 21
Views: 11120

mdbarry

That looks good... Any more pics of how the engine has been mounted? Any major problems along the way?

Cheers

Andrew